| 282.30.1175.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | Width (mm):48; Basic dynamic load rating (C):366 kN; C:48 mm; Outer Diameter (mm):300; Weight:9,82 Kg; B:48 mm; Bearing number:N2944; (Grease) Lubrication Speed:2000 r/min; D:300 mm; Size (mm):220x300x48; Basic static load rating (C0):655 kN; Bore Diameter (mm):220; d:220 mm; Ew:281,5 mm; |
| 61.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | db (max):26 mm; Inside Ring Outside Diameter:27 mm; r1:0.6 mm; Fillet Radius/Chamfer:1 mm; Radial Clearance:0.035 to 0.060 mm; Limiting Speed - Oil:18,000 rpm; dd (min):32 mm; dc (min):29 mm; Static Load Rating:12,700 N; Limiting Speed - Grease:15,000 rpm; db (min):25 mm; D:47 mm; ra1 (max):0.6 mm; Enclosure:Open; Dynamic Load Rating:15,400 N; Da (max):41 mm; Bore Type:Cylindrical Bore; ra (max):1 mm; |
| 162.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | D:340 mm; Ew:300 mm; Bore Diameter (mm):160; Size (mm):160x340x114; Bearing number:NP2332 E; Width (mm):114; (Grease) Lubrication Speed:1300 r/min; C:114 mm; Outer Diameter (mm):340; Weight:59,6 Kg; Basic dynamic load rating (C):1310 kN; d:160 mm; Basic static load rating (C0):1820 kN; B:114 mm; |
| 232.20.0700.503 Type 21/850.2 Standard 5 Slewing Ring Bearings | Enclosure:Single Shield with S; Configuration:Single Row; Snap Ring Width:1.7 mm; Factor fo:13.2; da (min):37 mm; Snap Ring Outside Diameter:78.6 mm; Bore Type:Cylindrical Bore; D1 (max):68.8 mm; ra (max):1 mm; Da (max):65 mm; Limiting Speed - Grease:10,000 rpm; Fillet Radius/Chamfer:1.1 mm; D:72 mm; B:19 mm; Limiting Speed - Oil:12,000 rpm; a (max):3.3 mm; b (min):1.9 mm; Dx (min):80 mm; Radial Clearance:0.013 to 0.028 mm; |
| 60.22.0660.001.11.1503 Standard 5 Slewing Ring Bearings | OD Chamfer Length (Co):0.072; Bearing Type:straight; Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; Bearing Length, Nominal (B):4.000; ID Chamfer Length (Ci):0.031; Wall Thickness (S3):0.095; ID Chamfer Angle (B deg.):30; Housing Bore Dia. (Dh) - 6.9374:6.9358; Bore Diameter (mm):171,45; Bearing number:AST50 108IB64; Material:Carbon steel shell w; Shaft Dia., Nominal (d):6.7500; |
| 61.20.0560.101.21.1503 Standard 5 Slewing Ring Bearings | Weight:0,035 Kg; Size (mm):26.988x34.925x19.05; Bore Diameter (mm):26,988; Bearing number:BH-1712; D:34,925 mm; Basic dynamic load rating (C):29,49 kN; Width (mm):19,05; Outer Diameter (mm):34,925; C:19,05 mm; (Grease) Lubrication Speed:2300 r/min; Basic static load rating (C0):52,49 kN; Fw:26,988 mm; |
| 162.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Da max:116 mm; e:0,23; C0r:226000 N / Static lo; ds:3,2 mm; ra max:1,5 mm; D1:112,5 mm; Cur:28000 N / Fatigue li; ns:6,5 mm; da min:79 mm; Bore Diameter (mm):70; m:1,65 kg / Weight; Outer Diameter (mm):125; d2:84,4 mm; Bearing number:22214-E1; Width (mm):31; nG:6700 1/min / Limitin; D:125 mm; Size (mm):70x125x31; nB:4100 1/min; rmin:1,5 mm; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Weight (kg):1047; Size (mm):850x1120x365; Bearing number:GE850-DO; C (mm):310; Da min (mm):940; alf (°) :3,4; Width (mm):365; Bore Diameter (mm):850; Outer Diameter (mm):1120; C0r (N):143000000; da max (mm):914,8; r1s min (mm):3; Cr (N):28600000; r2s min (mm):6; dK (mm):985; |
| No. | Brand | b | U | H | N | S | c | l | d |
| 232.20.0800.503 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | 80 |
| 231.21.1075.013 Type 21/1200.1 | Standard 5 | - | - | - | - | - | - | - | 100,000 mm |
| 231.20.0800.013 Type 21/950.1 | Standard 5 | - | - | - | - | - | - | - | 460 mm |
| 61.25.0764.103.11.1504 | Standard 5 | - | - | - | - | - | - | - | 170 mm |
| 61.20.0630.101.21.1503 | Standard 5 | - | - | - | - | - | - | - | 60 mm |
| 280.30.1075.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | 20 mm |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | - | - | - | - | - | - | - | 480 mm |
| 61.25.0764.106.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | 110 mm | - | - | - | - | - |
| 60.20.0644.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0630.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | 500,000 mm |
| 230.21.1075.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | 92,075 mm |
| 3R16-197E2 | Rotek | - | - | - | - | - | - | - | 481,228 mm |
| 3R16-248E1 | Rotek | - | - | - | - | - | - | - | 87,312 mm |
| 231.20.1000.013 Type 21/1200.1 | Standard 5 | - | - | - | - | - | - | - | 34,925 mm |
| 60.20.1094.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | 75 mm |
| 162.16.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 85 mm |
| 162.16.0560.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | 25 mm |
| 230.20.0800.503 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | 75 mm |
| 232.21.0575.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | 45 mm |
| 161.20.0450.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 65 mm |
| 60.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.1000.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | 75 mm |
| 162.25.0764.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | 190 mm |
| 230.20.0400.013 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | 104,775 mm |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | 2 inch |
| 3R16-220E1 | Rotek | - | - | - | - | - | - | - | 47 mm |
| 62.25.1077.308.11.1504 | Standard 5 | - | - | - | - | - | - | - | 35 mm |
| 3R16-220N1 | Rotek | - | - | - | - | - | - | - | 38,1 mm |