| 7019A5TRDUMP3 NSK Super Precision Bearings | Oil Speed Rating n2:4300 rpm; B:61.90 mm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:138000 N; Basic Static Radial Load Rating Co:108000 N; d:65.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| 7918A5TRSULP3 NSK Super Precision Bearings | Mass pillow block:81.2 kg; Initial grease fill:765.45 g; A1:130.175 mm; P60°:308 kN; S:4.763 mm; L:466.725 mm; ba:57.944 mm; Cap bolt:3/4-10 UNC; R2:36.513 mm; P90°:185 kN; RG:1/2 NPT; H1:152.4 mm; da:130 mm; Cap bolt, SAE grade:8; Ca:73.787 mm; P150°:118 kN; Bearing limiting speed:3600 r/min; R1:79.375 mm; Cap bolt recommended tightening torque:515.2 N·m; PG:1/4 NPT; |
| 7919A5TRDUDMP3 NSK Super Precision Bearings | s1:24.3 mm; B1:39.5 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Recommended tightening torque for grub screw:7.4 N·m; Db2:95 mm; Housing material:Cast iron; Mass bearing unit:1.3 kg; A1:13 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A5:22 mm; A3:3.2 mm; T:45.3 mm; N4:4 mm; J6:106 mm; N:14 mm; d:36.513 mm; J7:29 mm; Da:106.4 mm; Basic static load rating C0:15.3 kN; |
| 7021A5TRDUDLP3 NSK Super Precision Bearings | d:61.913 mm; B:69.9 mm; Recommended tightening torque for grub screw:28.5 N·m; s1:39.7 mm; Db1:150 mm; L:187 mm; Limiting speed:2800 r/min; Housing material:Cast iron; Mass bearing unit:5.75 kg; Basic dynamic load rating C:62.4 kN; A1:17 mm; RG:1/8-27 NPT; Recommended diameter for attachment bolts, mm G:16 mm; A:57 mm; N:19 mm; Basic static load rating C0:45 kN; Hexagonal key size for grub screw N:5.556 mm; |
| 7920A5TRDUMP3 NSK Super Precision Bearings | Basic Static Radial Load Rating Co:5100 N; B:7.00 mm; Basic Dynamic Radial Load Rating C:6050 N; d:45.000 mm; Grease Speed Rating Open/Shielded n1:9500 rpm; D:58.0000 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; Sealed Speed Rating n3:6700 rpm; Fillet Radius ra:0.30 mm; Accessories:One Seal; |
| 7220A5TRDUDMP3 NSK Super Precision Bearings | Fillet Radius ra:1.50 mm; B:42.90 mm; Grease Speed Rating n1:4500 rpm; Sealed Speed Rating n3:4500 rpm; Accessories:No Shield, no Seal; D:100.0000 mm; d:45.000 mm; Basic Static Radial Load Rating Co:53000 N; Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:72800 N; |
| 7921CTRDULP3 NSK Super Precision Bearings | Db min.:54 mm; Calculation factor Y:1.8; d:28.575 mm; db min.:35 mm; Da min.:49 mm; ra max.:0.8 mm; Cb min.:3.5 mm; Basic dynamic load rating C:58.2 kN; Dimension series:1900; rb max.:1.5 mm; r3,4 min.:1.5 mm; a:13.702 mm; Da max.:50 mm; C:15.875 mm; Reference speed:10000 r/min; Limiting speed:12000 r/min; T:19.845 mm; B:19.355 mm; Fatigue load limit Pu:6 kN; Mass bearing:0.23 kg; |
| 70BER10STSULP3 NSK Super Precision Bearings | b:7.7 mm; r2 min.:1 mm; B:63 mm; Basic static load rating C0:1560 kN; Specific static load factor K0:500 N/mm²; b1:7.7 mm; d:60 mm; Mass plain bearing:2.4 kg; da max.:67 mm; Da min.:92 mm; Specific dynamic load factor K:150 N/mm²; Da max.:99 mm; C:40 mm; Design (sliding contact surface combination):Steel/steel; M:4 mm; da min.:67 mm; Material constant KM:330; Sealing solution:Triple-lip seals; |